To work with an organization in which I can contribute my technical skills and experience to enhance my productivity and efficiency as well as achieving the organizational objectives with the attribute of the time, quality and discipline.

• A dynamic B.E (Electronics and Communication) professional with more than 5.5 years of experience in embedded software and product development.

• Experienced in designing and developing various micro controller based embedded system including multi core systems.

• Planning & execution by means of requirement gathering, designing, testing and encompassing entire product development life cycle.

• Worked with a different kind of minds and maintain good team bonding with them.

• Effective communicator with excellent relationship management skills, strong technical, analytical and problem-solving skills. Enjoy challenges and working against odds.

• A versatile individual, capable to bring about strategic change, both within and outside the team to meet organizational goals.

• Innovative in approach, enjoy learning new methods and ideas, putting them into regular practice.

• Potential of proving myself as one of the greatest & rarest assets to an organization.

As follows: 

Job responsibilities:

• Assuring our software to adhere MISRA and ASPICE compliance.

• Working on MCAL driver for TC4xx devices with ISO 26262 and ISO .

Job responsibilities:

• Supporting R&D team at Samsung SSIR, BLR for automotive storage devices (memory division) to support software implementation and verification with automotive industry standard.

• Assuring firmware software to adhere MISRA compliance and ASPICE v3.0 process.

• Working on advance high speed memory solution like UFS 3.1, eMMC etc.

Job responsibilities:

• Having almost 4 years of experience in RBEI as software and function developer.

• Worked as software developer for customers like Honda, Daimler, Audi, Toyota, Nikola, Qingling and JLR.

• Handled the responsibility of HMC customer’s function development for a year.

• Have worked on Data Driven Charge Control and Model Based Charge Control, control strategies for Diesel Air System.

• Have been a part of FCCU (Fuel cell control unit) pilot project.

• Responsibility of customer's requirement handling, function development and function testing.

• Hands over auto-code generation tool ASCET, MATLAB and ETAS’s Scode & ConGra.

• Hands over Time Partitioning Testing tool (TPT).

• Hands over other tools like ECU Worx, Sedge and RQ-One.

• Have worked on software migration from software for single core to multi-core ECUs.

• Extensively worked on various function monitoring strategies and reporting DFC and DTR.

• Have experience in package integration and interface dependency check.

• Produce high quality and optimized C code with performance and scalability considerations at each step of the development process.

• Standard engineering practices for builds, source organization, Code review, Unit tests and function test.

• Good communication and presentation skills, ability to interrelate with people at all levels.

• Involved in Testing & Test Execution of tasks at various phases of development and implementation.

• Knowledge of ASPICE.

Job responsibilities:

• As an Electronics engineer, maintenance and monitoring of various projects.

• Testing and Designing of circuits.

• Developing Test setup; required for in-house testing.

• Actively involved in R&D of projects according to customer requirement.

• Repairing of all faulty electronic components used in products.

• Onsite support and training.

• Testing of PCBs, Connectors and Power Supplies.

Job responsibilities:

• As an Embedded engineer, maintenance and monitoring of various project.

• Assembling hardware and Testing of circuits.

• R&D in projects according to customer requirement.

• Testing Sensors, PCBs, Connectors, Power Supplies, logic circuits.

• Final designing of PCB & instrument.

• Fault finding in PCB and system.

• Monitoring and maintaining daily target as required in the project.

1. Worked as Customer Support Executive at Teleperformance, Indore in In-voice Process, from Apr-2016 to Oct-2016.

2. Worked as Data Management Executive at Network18 Media Pvt Ltd, Indore, from July- 2015 to Mar-2016.

• Working as software and function developer in the project for the Diesel Air System to control the charge flow with DCC, MCC and MCC-T control strategy.

• Analysis of customer Requirements.

• Coordination with on-site team to understand the requirement.

• DCC (Data Driven Charge Control), MCC (Model based Charge Control) and MCC-T (Model based Charge Control in Transient) are the control strategies used for Diesel Systems, which hold good for HP and LP diesel engine layouts for passenger cars and commercial vehicles.

• To meet the emission norms the concept of MCC-T is used to control the NOx peaks and also have the smoke limitation in case of engine dynamics.

• The control strategies have robust monitoring strategies and reports the system condition continuously.

• Apart from closed loop control strategies, robust monitoring of the system is done to meet the OBD standards.

• Coordinating with team members to effectively carry out all project activities such as effort estimation, analysis, design, coding, integration and testing.

• Software Development in C domain

• Review Support and task co-ordination and tracking

• Function and system testing

• Package integration and integration testing.

• B.E. in Electronics and Communication from Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal in First Division in year 2015.

• Passed Higher Secondary in First Division in year 2011 from School of Excellence, Dhar.

• Passed High School in First Division in year 2009 from School of Excellence, Dhar (M.P.)

• 4 weeks certification training on "Embedded System Development using Arduino" at Edo square training centre, Indore.

• 21 days certification training on “Leadership development program” at Teleperformance, Indore.

• Advanced Certification Training on “Machine Learning” from Simplilearn, Bangalore.

• Awarded Bravo for BOSCH productivity improvement idea in March- 2020.

• Awarded Best Employee of the month (July-16) in Quality and working hours.

• Successfully organize and take participation in Ujaas-2k14 in my college.

Programming Language: C, Embedded C, C++, Python Operating Systems: RTOS, Windows, Linux

Programming IDE: ECU_Worx, Eclipse, Arduino, MATLAB, Visual studio

Compiler: GCC, MinGW, Green Hills, AVRdude

Version control: Git Hub, SVN, SDOM, bitBucket

Documentation Tools: PDF, XML, MS Word, E-Handbook, Polarion

PCB Designing Tools: Eagle, Dip Trace

Protocols: UART, SPI, I2C, CAN.

Interfaces: RF, ADC, Bluetooth, RFID, Smart Card, LCD, Keypad, Keyboard, RTC, EEPROM, DTMF etc.

Sensors: MEMS, Accelerometer, IR, LDR, Proximity, Vibration, touch, Ultrasonic, Temperature, PIR, Fire, Smoke, Color, Humidity, Alcohol, Water flow and level etc.

Date of Birth: 09-Dec-1993

Father Name: Mr. Jagdish Sharma

Gender: Male

Marital Status: Married

Languages: Hindi and English